Description
Ensures an optimum protection against corrosion in closed and semi open water systems by a synergistic blend of organic and inorganic inhibitors. Iron, copper and aluminium materials are protected.
Benefits
- Contains scale control additives which also at high temperatures prevent calcareous deposits and
- disperse suspended matter so that the heat transfer surfaces will be kept clean.
Dosing, Addition
The product concentration in the circulation water should be 2.000 up to 5.000 g/m3and is dependent on the following factors:- neutral salt concentration (chloride/Cl-, sulfate/SO42-)
- total hardness (alkaline earths)
- carbonate hardness (HCO3-)
- max. temperature of the cooling water
In hard saline waters with a total hardness of more than approx. 20°dH, a carbonate hardness of approx.
5 mol/m3 (approx. 14°dH), a chloride concentration of approx. 8 mol/m3 (approx. 300 mg Cl/l) and a sulfate concentration of approx. 1 mol/m3 (approx. 100 mg/ SO42-) a product concentration of 5.000 to 10.000 g/m3 is recommended.
Technical data
| Description: | yellowish liquid |
| Density at 25°C (g/cm3): | approx. 1.1 |
| pH-Value (100 g/l water): | 11.5 – 12.7 |
| PO43- -Content (%): | approx. 0.5 |
| Solubility in water: | in any proportion miscible with water |
Packing
| PE-cans: | 30 kg |
| PE-cans: | 60 kg |
| PE-barrels: | 200 kg |
| Containers: | 1000 kg |
Storage
In closed original packages KEBOCOR 213 is storable for at least 2 years. Protect from freezing.
Notes. References
In case of proper application KEBOCOR 213 complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).Kosher certification number: 81173637, company number: 0351
The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.