Description
A corrosion inhibitor for steel and copper in aqueous solutions. It is particularly suitable for the prevention of standstill corrosions.
The product consists of a synergistically acting blend of special carboxylic acid derivatives and copper inhibitors.
Benefits
Is insensitive to the scale forming agents of the water to a large extent.
Dosing, Addition
The optimum dosing rate should be determined with our Department for Application Technique. The following values are guide rates.
- In general a circulation system can be protected against corrosion by adding 0.5 %
KEBOCOR 206 CU. - In case of standstill corrosions of freshly pickled surfaces 1 % KEBOCOR 206 CU should be added.
- Highly salty waters require a concentration of 1.5 - 2.0 % KEBOCOR 206 CU.
Technical data
| Description: | brownish liquid |
| Density at 25°C (g/cm3): | approx. 1.1 |
| pH-Value (100 g/l water): | 7.5 – 8.5 |
| Solubility in water: | miscible |
Packing
| PE-cans: | 20 kg |
| PE-cans: | 30 kg |
| PE-barrels: | 200 kg |
| Containers: | 1000 kg |
Storage
In closed original packages KEBOCOR 206 CU is storable for at least two years.
KEBOCOR 206 CU may become darker in the course of time, however, without losing its efficiency.
Notes. References
In case of proper application KEBOCOR 206 CU complies with the requirements of the German Food and Feed Code (LFGB, revised version by announcement of 15.09.2021).The products shown on our website are only a selection of our entire product range. There is no universal remedy for the rapid removal of impurities. Some can be removed well with alkaline agents, others better in the acidic range. The large variety of conceivable cleaning problems and the large number of additives, inhibitors and ready-to-use cleaning solutions offered by us make it advisable to obtain detailed advice before starting cleaning.
The same applies to inhibitors, defoamers, scale preventers, corrosion inhibitors, pickling inhibitors, etc. Depending on the plant, material, product and the type of boiler/cooling water is used, different individual challenges arise. We are well equipped for them.
Talk to us, we will be happy to help!
On request, we can analyze deposits in our laboratory and develop a cleaning strategy based on our many years of experience, taking into account the conditions on site.